MicroLens

Know your microscope

For BIO 107: the parts, the order of steps, magnification and measuring. No tissue is named in any task.

  1. K1. Name the part

    Find each part of a student microscope on a drawing.

    Not done yet.

    Start
  2. K2. Order the steps

    Put the six steps of setting up a view in the manual's order.

    Not done yet.

    Start
  3. K3. Spot the unsafe step

    Find the step that could break a slide or a lens.

    Not done yet.

    Start
  4. K4. Total magnification

    Work out the total magnification from the eyepiece and the objective.

    Not done yet.

    Start
  5. K5. Field of view

    Predict how wide the field is at a higher objective, then see it.

    Not done yet.

    Start
  6. K6. Calibrate the eyepiece scale

    Line up the eyepiece scale with the stage micrometer at ×10 and ×40.

    Not done yet.

    Start
  7. K7. Measure with the eyepiece scale

    Measure the marked line on the stage micrometer, in micrometres.

    Not done yet.

    Start
  8. K8. The eyepiece view

    Move the slide so the letter goes left, with the image turned as an eyepiece shows it.

    Not done yet.

    Start

Draw it

The drawing stays on paper, as in the practical. The phone sets the task, checks your magnification and gives the examiners' checklist.

  1. D1. Draw it

    Draw the marked line on paper, then check your drawing's magnification and the examiners' checklist.

    Not done yet.

    Start

The wording follows a Nigerian lab manual (NOUN BIO 191) and WAEC's examiners' reports, and is not yet checked by a BIO 107 lecturer.

Tips

  • Do the tasks in order the first time. Each one uses what the one before taught.
  • Every task opens on the bench, so you can try the microscope as you go.

Tasks could not start on this phone. Check your connection, then try again.

Try again